How to Replace Baseboards
Baseboards that have been attached to the walls for several years can be damaged in the long run. Therefore, knowing how to replace baseboards can instantly make a room more elegant. Anyone who has nothing to do during the weekend can get rid of the old baseboards and construct something new that is simple yet pleasing to the eyes.
The step-by-step procedure on your Home Improvement, replacing baseboards is listed below. Make sure to use protective equipment such as safety glasses when performing these steps.
The first step to replace baseboards is taking out the baseboards by using one of these tools: a claw hammer, a putty knife or a pry bar. Other materials such as thin wood and cardboards can be employed to pry wood against the wall. Utilizing any of these tools will be of great help in taking out wood trim from the wall. These tools also ensure that the wall is not damaged.
The second step to completely replace baseboards is to measure the old baseboards. This step is necessary because it allows one to have an idea regarding measurements when buying the wood molding. It is highly recommended to purchase wood with 15% allowance so that it can be cut in case of errors.
The third step is to measure the specific corner of the room where the new baseboards will be installed. One who plans to replace baseboards is discouraged from cutting wood based on the old ones. The best technique is to determine the measurements of the wall itself which will verify the right angles of cutting the baseboards.
The fourth step to properly replace baseboards is cutting the new ones. The most recommended tool to use is a miter saw which can be adjusted to cut in the preferred angle. Anyone who does not have enough experience in cutting should take some time to practice. This is to ensure that the actual baseboard molding is not messed up. The old baseboards can always be used as a basis whenever in doubt.
The fifth step is to place the baseboard without nails first to guarantee that the cut is appropriate. Adjust the cut if necessary then test the baseboard’s fitting once again. Apply a finish on the wood once satisfied with the cut to replace baseboards.
The final step to successfully finish your home improvement the task is to attach the baseboard into the wall. Carefully affix in one corner and connect to the other corner. A nail gun or hammer and nails can be utilized to replace baseboards.
Address: 3778 Corliss Crescent
Mississauga, ON L4T 2Z5
Phone: (416) 568-3547