The best ways to Bring Your Interior Painting Ideas to Life

Or possibly something is wrong with your existing paint task and you desire to make sure it does not occur again. Check the troubleshooting section for solutions to help ensure your brand-new interior painting ideas turn out looking as good as you imagined.

Prep Work

To do your indoor painting ideas justice and shield surrounding products, it's vital that you do a little preparation work.

Move furnishings from space or cover it with a drop cloth.
Eliminate wall hangings, switch over plates, ceiling fixtures (if possible), window latches, doorknobs, and so on

. Use masking tape and plastic sheets to cover items and surface areas that will not be painted and can not be moved. Cover the floor with ground cloth.

Wash the walls from all-time low approximately avoid streaking. Rinse with water and a sponge.
Use drywall compound to smooth and fill holes out rough areas in walls. As soon as the compound is dry, lightly sand it with fine-grit sandpaper (150 to 200 grit).
Vacuum up the dust after sanding.

Painting

After you've prepped, it's time to see your interior painting concepts materialize! To paint a common wall, follow these simple steps.

Paint top to bottom. Start with the ceiling, then the walls and woodwork.

Paint the ceiling edges with a brush, creating a border about 2" to 3" wide.

The easiest means to paint a ceiling is with a roller and extension deal with. This enables you to stand on the floor while you paint.

Dip your roller in the paint tray and roll it backward and forward on the ridged part of the tray.

Use diagonal or zigzag strokes to get the paint on the surface. Return over the area with longer, up and down strokes to even out the surface.

When the ceiling is dry, start painting the walls. Use a brush to paint edges, ceiling edges and areas adjacent to woodwork.

Use roller to paint in blocks of roughly 4 x 4 feet. Paint nearby blocks before each previous block dries to help mix the edges.

Work from the ceiling down to the baseboards. Do one entire wall or location at a time.

Paint molding and woodwork with a brush. Use large concealing tape to mask off adjacent locations (e.g., window panes).

Paint with the grain of the wood. Use short strokes to coat the surface with paint, then use longer, smoother strokes for an even, completed surface.

Got painting concepts you do not know how to begin? Or perhaps something is wrong with your existing paint job and you want to make sure it doesn't happen again. Check the troubleshooting section for options to help guarantee your brand-new indoor painting concepts turn out looking as excellent as you envisioned.

Eliminate wall hangings, change plates, ceiling components (if possible), window latches, doorknobs, and so on

. Use concealing tape and plastic sheets to cover objects and surface areas that will not be painted and can not be moved.